|
Privacy Policy
E-Mail Us:
radfordchimneyworks@charter.net
For technical support please e-mail the webmaster
Last updated November 9, 2006
| |
Back to Woodburning Inserts
 The
Hearth Heater combines the best qualities of the Freestanding stove and the
Insert series. It allows you to eliminate the cold draft of an open
fireplace and because it sits out on the hearth, gives you both convective heat
and radiant heat. It even provides a cooktop surface.
The Hearth Heater connects to a chimney system through a flue
at the back of the unit. This makes it extremely flexible for
installation into existing masonry fireplaces of all sizes and shapes and into
all factory-built fireplaces. If no other insert seems to fit, the
Hearth Heater usually will.
The Hearth Heater has been designed to keep a large living
area toasty warm for many hours with just one load of wood. To contain
this intense heat source the product is designed with the same superior
engineering features used in our woodstoves and fireplace inserts. In
any woodstove, the top and baffle are the two components that undergo the most
heat stress and threaten the stove's long term durability. Regency uses
1/4" steel, reinforcing these components with heavy steel ribs. Our
products' durability is reflected in our Limited Lifetime Warranty.
The Hearth Heater will elegantly decorate a downtown condo as
easily as a country cottage. The tarnish free gold plated door makes
sure you won't be spending your time with constant cleaning and polishing like
brass. This hearth product can be installed flush to the hearth or on
legs. Perfect for a traditional hearth mounted wood stove look.
Choose a black cast iron door instead of the gold plated door
or add the powerful blower to increase heat circulation; in short-design your
own special Hearth Heater and take it home.
| Optimum Efficiency |
72% |
| Emissions (gms/hr) |
3.5 gms. |
| *Max BTU |
70,000 |
| *Typical Sq. Ft. Heated |
800-1500 |
| Maximum Log Size |
18" |
| *Burn Time (Typical) |
up to 8 hours |
| Firebox Size (cu ft) |
1.6 |
| Shipping Weight |
330 lbs. |
| Height to Flue Top |
20" |
| Width at Back |
24 1/2" |
| Hearth Extension excluding ashlip |
16 1/8" |
| Faceplate Regular (WxH) |
40 1/4" x 30 1/16" |
| Faceplate Oversize (WxH) |
48 1/4" x 33 1/16" |
| Minimum Fireplace Opening |
|
| Height |
20" |
| Width |
7" |
| Depth |
9" |
*Length of burn and BTU range depends on type of wood, climate conditions
and installation.
Price
(Prices due to change without notice)
| Basic Equipment-Body |
Price |
| Black door |
$1,692 |
| Gold door |
$1,882 |
| Faceplates (black with black trim) |
| Regular |
$186 |
| Oversize |
$220 |
| Options-Legs |
| Cast iron black |
$80 |
| Cast iron gold plated |
$304 |
| 2-speed Blower |
$304 |
| Stainless Liner Kit |
| 5.5" x 25 Ft. Insert flex kit |
$570 |
| 5.5" x 35 Ft. Insert flex kit |
$708 |
Please Note: Regency
and Waterford have a strict policy on sales over the internet. Please feel
free to browse our selection, if you see a stove you are interested in but are
not in our service area (Montgomery, Floyd, Pulaski or Giles Counties) visit
Regency's or Waterford's dealer
locator to find a authorized dealer near you.
Top of Page
|
Radford
Chimney Works